l              配置Switch A：

# 開啟全局GVRP。

<H3C> system-view

[H3C] gvrp

GVRP is enabled globally.

# 將乙太網連接埠Ethernet1/0/1配置為Trunk連接埠，並允許所有VLAN通過。

[H3C] interface Ethernet 1/0/1

[H3C-Ethernet1/0/1] port link-type trunk

[H3C-Ethernet1/0/1] port trunk permit vlan all

# 在Trunk連接埠上開啟GVRP。

[H3C-Ethernet1/0/1] gvrp

GVRP is enabled on port Ethernet1/0/1.

l              配置Switch B：

# 開啟全局GVRP。

<H3C> system-view

[H3C] gvrp

GVRP is enabled globally.

# 將乙太網連接埠Ethernet1/0/2配置為Trunk連接埠，並允許所有VLAN通過。

[H3C] interface Ethernet 1/0/2

[H3C-Ethernet1/0/2] port link-type trunk

[H3C-Ethernet1/0/2] port trunk permit vlan all

# 在Trunk連接埠上開啟GVRP。

[H3C-Ethernet1/0/2] gvrp

GVRP is enabled on port Ethernet1/0/2.