l 配置Switch A:
# 開啟全局GVRP。
<H3C> system-view
[H3C] gvrp
GVRP is enabled globally.
# 將乙太網連接埠Ethernet1/0/1配置為Trunk連接埠,並允許所有VLAN通過。
[H3C] interface Ethernet 1/0/1
[H3C-Ethernet1/0/1] port link-type trunk
[H3C-Ethernet1/0/1] port trunk permit vlan all
# 在Trunk連接埠上開啟GVRP。
[H3C-Ethernet1/0/1] gvrp
GVRP is enabled on port Ethernet1/0/1.
l 配置Switch B:
# 開啟全局GVRP。
<H3C> system-view
[H3C] gvrp
GVRP is enabled globally.
# 將乙太網連接埠Ethernet1/0/2配置為Trunk連接埠,並允許所有VLAN通過。
[H3C] interface Ethernet 1/0/2
[H3C-Ethernet1/0/2] port link-type trunk
[H3C-Ethernet1/0/2] port trunk permit vlan all
# 在Trunk連接埠上開啟GVRP。
[H3C-Ethernet1/0/2] gvrp
GVRP is enabled on port Ethernet1/0/2.