l 配置Switch A: # 開啟全局GVRP。 <H3C> system-view [H3C] gvrp GVRP is enabled globally. # 將乙太網連接埠Ethernet1/0/1配置為Trunk連接埠,並允許所有VLAN通過。 [H3C] interface Ethernet 1/0/1 [H3C-Ethernet1/0/1] port link-type trunk [H3C-Ethernet1/0/1] port trunk permit vlan all # 在Trunk連接埠上開啟GVRP。 [H3C-Ethernet1/0/1] gvrp GVRP is enabled on port Ethernet1/0/1. l 配置Switch B: # 開啟全局GVRP。 <H3C> system-view [H3C] gvrp GVRP is enabled globally. # 將乙太網連接埠Ethernet1/0/2配置為Trunk連接埠,並允許所有VLAN通過。 [H3C] interface Ethernet 1/0/2 [H3C-Ethernet1/0/2] port link-type trunk [H3C-Ethernet1/0/2] port trunk permit vlan all # 在Trunk連接埠上開啟GVRP。 [H3C-Ethernet1/0/2] gvrp GVRP is enabled on port Ethernet1/0/2.